Parts Identification: Electric Meat Band Saw Machine QH350
Specification
Material: stainless steel 304
-
Pass height ：350mm
-
Voltage 220/380V
-
Machine size :785*680*1620mm.
-
Saw blade size ：2580*16*0.56mm；
-
Table size :785*680mm
-
Motor Power ：1.5kw.
-
Pass width ：300mm
-
GW :140kg
-
NW:165kg
-
Package size:760X830X1720mm.
Commercial Meat Processing Machinery
How to use the saw:
-
1.Machines must be placed on horizontal ground;
-
2.Open the door of the box and set the saw belt on the pulley;
-
3.Tension saw belt. Turn the top handle of the machine, adjust the tension of the saw belt, and adjust it to the saw bone without slipping. Too tight affects the life of saws, too loose can not work properly;
-
4.Move the pulley with your hand to check whether the saw blade is smooth. If the saw blade is shifted
out of the pulley, the professional tool can be used to turn the fine adjustment screw clockwise. If the saw blade is shifted inside the pulley, the professional tool can be used to twist the fine screw with counterclockwise until the saw blade is running smoothly;
-
5.Close the box door machine to start normally
Commercial heavy food processing machinery
Precautions for use:
-
1.The operator shall understand the main structure and working principle of the machine in detail,the name and function of various buttons, and adjust the buttons to initial position;
-
2.Avoid places where children often appear;
-
3.When the machine is in operation, the hand should not be very near the saw blade;
-
4.Do not open the cover when the machine is running,if open,sensor switch will stop machine.
-
5.If the power cord is damaged, please be sure to replace the professional technician in time to avoid damage;
-
6.Non-operator, no operating machine;
-
7.Please keep the machine clean and maintain the equipment periodically.
Industrial heavy food processing machinery
Post time: Oct-10-2022